DC12V UCS1903 WS2811 60LED 20Pixels Digital led strip

Part No:IL-S10060UCS1903

Features: 

1.dc12v 14.4W/m

2.white and black pcb

3.WS2811/UCS1903 IC Chip 

4.LED wavelengths: 630nm / 530nm / 475nm

5.20pcs ws2811/ucs1903 ic chip and 60pcs smd5050 rgb led per meter

6.10mm pcb width,pitch distance is 16.67 mm

7.PCB is with 2 ounce copper

What's more 

Those digital pixel strip are with 60pcs smd5050 rgb led lamp per meter, drived by 20pcs ws2811/ucs1903 ic chip,that is,3leds with one ic chip.The digital pixel led strip is with dc12v, 14.4w/m..Those ucs1903/ws2811 digital pixel led strip is with 10mm pcb width,if do silicone tube for waterproof IP65, the width will be 12mm.And we have white and black pcb for you to choose.

And those digital 12v led strip is with flexible pcb,60leds with 20pixels ucs1903/ws2811 ic chip,each meter is with 20pcs solder pad,which means 3led can be cut,every 5cm.Normal we do is 5m per roll, and 5m with 3Pin JST SM female and male connectors.Female connectors is input, male connectors is output.Of course, we also can do customer length per roll and connectors,such as molex connectors,waterproof connectors.Each roll is with 2 extra power cable(this strip is dc12v to input power,so please don't use higher than 13V or you can destroy the entire strip).

The 12v ws2811 digital led strip is only 3 solder pads on the PCB,that is,12V+,DATA,GND,which is mix Data and clk into DATA,so only one data line,the advantage of one data is that it can transfer longer signal,such as first leds to controller can reach 15-20m,if over this,you need to use signal amplifier.

The 12v 60led 20pixels ucs1903 led strip is full color led strip, which need controller to make color changing,such as sd card controller k-1000c,k-8000c,T-700k/780k,online controller LM501,TX901,also some DVI/HDMI/RJ45 controller,which are operated by Arduino,Raspberry PI,Artnet/DMX512,Madrix software.