DC12V WS2818 60LED 20Pixels Digital led strip

Part No:IL-S10060WS2818

Features: 

1.dc12v 14.4W/m

2.white and black pcb

3.WS2818 IC Chip 

4.20pcs WS2818 ic chip and 60pcs smd5050 rgb led per meter

5.10mm pcb width,pitch distance is 16.67 mm

6.PCB is with 2 ounce copper

What's more 

Those WS2818 12V digital pixel strip are with 60pcs smd5050 rgb led lamp per meter, drived by 20pcs WS2818 ic chip,that is,3leds with one ic chip.The digital pixel led strip is with dc12v, 14.4w/m..Those WS2818 digital pixel led strip is with 10mm pcb width,if do silicone tube for waterproof IP65, the width will be 12mm.And we have white and black pcb for you to choose.

And those digital WS2818 12v led strip is with double date,each meter is with 20pcs solder pads,which means 3led can be cut,every 5cm.Normal we do is 5m per roll, and 5m with 4Pin JST SM female and male connectors.Female connectors is input, male connectors is output.Of course, we also can do customer length per roll and connectors,such as molex connectors,waterproof connectors.Each roll is with 2 extra power cable(this strip is dc12v to input power,so please don't use higher than 13V or you can destroy the entire strip).

The 12v ws2818 flexible led strip is 4 solder pads on the PCB,that is,12V+,DATA,BI,GND,which is double DATA,the advantage of double data is that when one ic chip broken,other leds can still keep working, also called Signal break-point continuous transmission.

The 12v 60led 20pixels ws2818 led strip is full color led strip, which need controller to make color changing,such as sd card controller k-1000c,k-8000c,T-700k/780k,online controller LM501,TX901,also some DVI/HDMI/RJ45 controller,which are operated by Arduino,Raspberry PI,Artnet/DMX512,Madrix software.