K-8000C sd card 8192 pixels 8 outputs SPI DMX programmable led controller

Part No:IL-K-8000C

Features:

1.DC5-24V working voltage

2.SD card programmable controller 

3.Offline controller

4.8 outputs , each output is 1024 pixels

5.SPI and DMX512 both can be used

6. A sceen on the front side than older version

7.Function to write dmx address for dmx led lights and strips

8.It can support RGB(3 channels) and RGBW（4 channels）

What's more

1.32 to 65536 degree Gray control, Gamma correction procession handle.

2.Support various point, line light source, and all kinds of rules and specific shaped handle.

3.The controller has eight ports output, each port can support up to 512/1024 lights(DMX lights can support up to 512 pixels).

4.The playback content stored in SD card, the SD card can store up to 32 files, SD cared capacity supports128MB-32GB.

5.The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters need to use 0.5M² pure copper power cord.

6.The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.

7.For the DMX lighting IC, the controller comes with write address function; In addition, with use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.

8.Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.

9.Enhanced 485 TTL and 485 differential (DMX) signal output.

10.The controller comes with the test effects were as follows: 1st is red, green, blue and black jump; 2nd is red, green, blue and black gradient; 3rd is red, green, blue and goes.