144leds SK6812 WS2812B Pixel addressable 5050 RGB led strip

Part No:IL-S100144SK6812/WS2812

Features: 

1.dc5v 34.56W/m

2.white and black pcb

3.SK6812 IC Chip built-in SMD5050 RGB

4.LED wavelengths: 630nm / 530nm / 475nm

5.144led sk6812/ws2812b 5050 rgb per meter

6.12mm pcb width,pitch distance is 6.94 mm

7.4oz pcb,becuase it is with high density of leds

What's more 

Those pixel strip are 144 leds rgb per meter, each led is with sk6812/ws2812b IC chip built-in SMD5050 RGB ,so they are fully addressable.Those addressable pixel led strip is with 12mm pcb width,if do silicone tube for waterproof IP65, the width will be 14mm.And we have white and black pcb for you to choose.Normal we say it is 5v ,each led is 0.3w max,normal is only about 0.24w per led, so 144leds with 34.56W.

And those strip is flexible pcb with 144 solder pads for each leds, that is, you can cut single led to match for your projects.Normal we do is 1m per roll(max 1.5m/roll), and each roll with 3Pin JST SM female and male connectors.Female connectors with input, male connectors with output.Of course, we also can do customer length per roll and connectors,such as molex connectors,waterproof connectors.Each roll is with 2 extra power cable(this strip is dc5v to input power,so please don't use higher than 6V or you can destroy the entire strip.

Those pixel addressable led strip is only 3 solder pads on the PCB,that is,5V+,DATA,GND,which is mix Data and clk into DATA,so only one data line,the advantage of one data is that it can transfer longer signal,such as first leds to controller can reach 15-20m,if over this,you need to use signal amplifier.