D40 3D 360degree 2PCS 24V WS2811 60LED Neon Strip Light

Part No:IL-SND40

Features:

1.Size for neon tube :Diameter 40mm

2.360degree view angle

3.DC12/24V,28W/m for 2pcs WS2811/UCS1903 60leds/m

4.IP67 waterproof

5.120LEDS/M(2pcs 12V WS2811/UCS1903 60LED 20Pixels/m )

   120LEDS/M(2pcs 24V WS2811/UCS1903 60LED 20Pixels/m)

6.Normal 5M with power at begining for dc24v,dc12v have power cable on both ends

7.Silicone tube,easy to bend any shape you like

8.3D 360degree view angle

9.Each meter with 2pcs screws for easy installations

10.2pcs 10mm pcb strips all can use,also can use DMX RGB/RGBW strips,dc5V/12V/24V.

11.End caps can do customer,normal is silicone end cap,with hole on both ends, also can do customer metal end caps

What's more:

1. Dimeter 40mm neon pixel led strips is 360degree veiw angle,inside with 2pcs 24V WS2811/UCS1903 60leds 20Pixels rgb led strip, SPI IC chip per meter. Drived by dc12v, 28w/m. 

2.Neon rgb pixel led strip is making by silicone neon strips, so make the color more beautiful.

3.Inside 2pcs pixel rgb strip is back to back so make it 360degree, becuase of much power, normal do 5M long max,but power them on both ends.

4.This 3D 360degree neon tube strips also can do single color warm white/cold white/pure white or red/yellow/green/blue/pink color/DMX RGB/RGBW strip

5.D40 3D 360degree rgb pixel neon strips is with M12 female and male conenctors.Also can do only input M12 connectors ,another side with closed end. 

6.3D 40MM diameter rgb pixel strips is SPI signal,so you can use controller with SPI TTL protocol,or use dmx decoder to work with Artnet or dmx.You can also use controller have SPI to DMX funtion such as H802Ra,H807SA,H827SA... to online work with Madrix software.

7.3D 40mm Neon flexible tube light is inside with 2pcs 10mm pcb strips, so all the 10mm pcb strip can use in it,such as single color white strip,dual white strip,rgb, SPI/DMX pixel led strips.